FLIR RS Update – Software to Further Improve Performance

ThermoSight RS
A Software update to further improve the performance of ThermoSight RS is now available on the FLIR
Web site.
With this update, a significant improvement in image performance is made possible by an upgrade to the
latest Tau 2.7.2 software. This update allows for three new processing modes that dramatically improve on-
screen detail and contrast. These updated levels of detail and contrast are further improved by tuning of the
LCD display to optimize image performance with additional gamma correction.
Based on user feedback, FLIR has updated the default ThermoSight Automatic Gain Control (AGC)
settings to provide the user three varying choices for a variety of conditions. These unique AGC settings are
pre-programmed as Scene Presets S1, S2 and S3. The Scene Preset controls are accessed via the advanced
tab of the menu (Setup/Advanced/Scene Presets). Users can obtain optimal image performance in a wide
range of conditions by toggling through these presets while in their unique environments.
Scene Preset 1 will now dedicate more contrast to the foreground object (target) and the background will
have less contrast, appearing darker in WH mode.
Scene Preset 3 will now provide the algorithm with more flexibility to generate an image with high contrast
in both the foreground and background targets. In S3, the background will appear lighter in WH mode.
Scene Preset 2 offers a balance between Preset 1 & 3 and is recommended for general use. Preset 2 will be a
factory default setting on all new production.
In addition to the scene presets, the following updates have been made to the InstAlert ® and screen
brightness settings:
InstAlert ® values have been improved and will now minimize over saturation of the “red hot” target.
Display brightness adjustments will now allow for a wider range of settings. This will improve use during
daylight shooting such as setting zero.
This free update is installed with a revised User (V1.04.02) GUI (PC only) and can be found here:

Pulsar CORE Thermal Clip-On, Thermal Monocular, and Thermal Weapon Sight

First ever seen by the press: Pulsar’s newest creation of multitasking is a thermal device never before attempted in the thermal systems market. More compact than any Pulsar’s predecessors the Core is carrying this name for a reason: it’s central component is designed to be used with attachment lenses to create a monocular, riflescope or the day scope front mounted system.

Moreover, the Core features the most advanced Pulsar’s thermal sensor integration design securing the top-notch performance in any configuration. The multitude of capabilities would be impossible to achieve without the Pulsar’s patent-pending invention of the multifocal display. With the know-how under it’s belt – the Pulsar brand is moving forward with the first production of this unit in September 2014

Pulsar Core with front monocular attachment
Pulsar Core with front monocular attachment
Pulsar Core with front attachment  - Left Rear
Pulsar Core with front attachment

 

  • Simple adaption of day riflescope for night shooting
  • Retaining point of impact
  • Easy mounting
  • Easy transfromation into monocular
  • User friendly interface
  • Wide operating temperature range
  • Wireless remote control
  • Lightweight and compact
Pulsar Core Specs
Pulsar Core Specs

Pulsar Quantum XD50A Thermal Imaging Monocular

hunter1pigs in brushhunter11hunter8hunter6 hunter4 hunter3

 

 

Product Quantum XD50A Quantum HD38A Quantum HD19A Quantum LD19A
Model # (SKU) PL77329 PL77323 PL77325 PL77329
Electronic components
Frame Rate, Hz 30 30 30 9
Microbolometer resolution, pixels 384×288 384×288 384×288 384×288
Sensor response LWIR LWIR LWIR LWIR
Spectral Sencitivity, µm 7.7 to 13.2 7.7 to 13.2 7.7 to 13.2 7.7 to 13.2
Pixel Pitch, µm 25 25 25 25
Display type LDC display LCD display LCD display LCD display
Display Resolution, pix. 640×480 640×480 640×480 640×480
Display diagonal, inch 0.31 0.31 0.31 0.31
Video output PAL/ NTSC PAL/ NTSC PAL/ NTSC PAL/ NTSC
Pin type of video input / output 3.5mm jack 3.5mm jack 3.5mm jack 3.5mm jack
Operation modes city, forest, identification city, forest, identification city, forest, identification city, forest, identification
Defective pixel repair option, yes/no yes yes yes yes
Optical characteristics
Magnification 2.8-5.6 4-Feb 2-Jan 2-Jan
Digital zoom, x 2 2 2 2
Lens diameter, mm 42 32 16 16
Lens focus, mm 50 38 19 19
Relative aperture, D/f’ 01:01.2 01:01.2 01:01.2 01:01.2
Field of View,°, horizontal * vertical 11×8.3 14.2×10.8 26.8×20.8 26.8×20.8
Field of View, m@100m, horizontal * vertical 19.214.4 25×19 26.8×20.8 26.8×20.8
Minimum focusing distance, m 5 2 3 3
Eye Relief, mm 20 20 20 20
Exit Pupil, mm 5 5 5 5
Diopter adjustment, dptr. ± 5 ± 5 ± 5 ± 5
Focusing type of distance internal internal internal internal
Range of Detection, m
Range of detection, m /yd(object 1250 / 1365 920 / 1000 470 / 515 470 / 515
(high*width = 1,7*0,5m)
Power Supply
Power Supply, V 4 ÷ 6 4 ÷ 6 4 ÷ 6 4 ÷ 6
Battery type 4xAA 4xAA 4xAA 4xAA
Battery life, hour 5.5 5.5 5.5 5.5
External Power Supply DC 8.4 ÷ 15 DC 8.4 ÷ 15 DC 8.4 ÷ 15 DC 8.4 ÷ 15
Physical & operational characteristics
Lens Material germanium germanium germanium germanium
Body Material glass-nylon composite glass-nylon composite glass-nylon composite glass-nylon composite
Tripod Mount, inch 2x 1/4 2x 1/4 2x 1/4 2x 1/4
Type of mount for weaver weaver weaver weaver
additional accessories
Operating Temperature, °C /°F – 25 to 50 / -13 to 122 – 15 to 50 / 5 to 122 – 15 to 50 / 5 to 122 – 15 to 50 / 5 to 122
Degree of Protection IPX4 IPX4 IPX4 IPX4
(acc. to IEC 60529)
Calibration manual manual manual manual
automatic automatic automatic automatic
semi-automatic semi-automatic semi-automatic semi-automatic
Length, mm 207 200 180 180
Width, mm 86 86 86 86
Height, mm 59 59 58 58

IR Defense Releases The IR Hunter MK II

Mark 2 IR HunterThe new IR HUNTER MK II is a breakthrough in the 640 category at the lowest priced 640 system ever at $5,495.00 and made to the same quality as the IR HUNTER. Externally the new sight is identical to the existing IR HUNTER with the following improvements.

1.            Sensor is a 640×480 MicroIR BAE 12um thermal engine

2.            12um Micron mean all existing lenses have a 35% increase in magnification over 17um Micron sensors

3.            40% power savings for longer battery life

4.            Battery cap has been moved forward for easier removal and installation

5.            60hz frame rate in a 640 weapon sight – yes 60hz. We also have a selectable 30hz mode for power saving, the 60hz takes more juice to run.

6.            640×480 VGA Emagin OLED for an extra sharp image.

7.            The display size has been reduced by 20% to make it ideal for both dedicated and clip-on operations.

8.            CLIP-ON – the sight will work with a bunch of 1x and variable 1-4x, 1-6x day optics. It works as is with no changes and no need for an accessory. It will work perfect out of the box using the feature in the system to sight it in.

9.            Image capture is improved and now will show the reticles in the images and it saves more images as well.

Pulsar HD19s Thermal Monocaular Review by Boar Gear

In our business we get asked all the time, “what is the best thermal for the money?” Our typical first response consists of three questions; what are you using it for? How often? What do you want to spend? After these questions are answered, we give our educated and honest answer. The real truth of the matter is thermal is expensive, and as with anything, there are good buys and there is equipment you can live without.

I will start out by saying that I have no thermal imaging sponsor or a company endorsement of any kind, and after writing this I will not be any closer to a sponsor or endorsement than I was before I began. Marketing is 90% of the hype with most outdoor and shooting gear , but the only real way to compare products is to put them side by side; which we do on a weekly basis, to insure our business is always positively evolving and staying on top of the newest and coolest thermals.

The unit I want to discuss with you today is one of the most inexpensive thermal units you can buy, yet it has features and functions that thermals that cost an additional $500 or even more, can’t offer you. Pulsar is a company that does not spend a lot of money marketing in order to land a spot on TV shows, like other some other companies. Nor does Pulsar cater to guys on an internet forum that have never looked through a Pulsar thermal; they have just read every tech review from every paid affiliate that has a keyboard and an audience. What Pulsar does do however, is produce a top quality product and stand behind it with a great warranty, if you do have any trouble.

The Pulsar Quantum HD19 S blew us away the first time we looked at it. I believe you can find this unit for around $2700 to $2900 retail which makes it just right for those looking to get an awesome thermal unit for under $3000. I will not bore you with a bunch of tech lingo that only makes sense to about 1/3 of the hunting and shooting world. I mean no insult, but 90% of the time I don’t care what is inside of it that is making it work. What I do care about 100% of the time though, is how well it works. So I’m choosing to spare you the breakdown of the internal technologies and skip right to the meat and potatoes of this very effective tool.

pulsar quantum hd19s thermal monocular

The resolution (384×288) is very clear, to an extent. The detection range is 500 meters which is a long way when you think about it but you cannot expect any kind of positive recognition at that distance. It’s optical lens is 19mm which is small and performance restrictive. This is a 1.1X unit with 2.2X digital zoom, so at 200 yards don’t expect to count hairs or ticks. What you can do at that distance, is say, “that’s a pig”, “that’s a calf”, “that’s a coyote” or “that’s someone trespassing on my place”.

With a 30hz refresh rate you are essentially watching live television as you scan around your area. Just for clarification, most other units in this price range have considerably lower refresh rates at 9 to 19 Hz and have a pause or freeze frame in them. Meaning that as you scan for the target, it tries to catch up with your scanning which really is not that big of a deal, but why deal with that if you don’t have to?  As you learn more about thermal from your research you will hear about calibration. A simple explanation of calibration would be your VCR (remember those?), when the picture started to become fuzzy and get those static lines running across the screen or some other distortion was obstructing a clear view, you had to adjust the tracking. Calibration is the same type of adjustment for your thermal unit. As you bounce around in the truck or walk around, the image needs to have the “tracking” adjusted. This unit has both automatic and manual calibration. You have two viewing modes, white hot and black hot. The white hot in my experience is the go to mode. White hot is easy on your eyes with adjustable brightness and contrast easily accessible on the front of the unit. Add the adjustable camera like focus on the optic lens and eye piece and you can see your target: crisp, clear, and brilliant white. We use the black hot on humid nights or during the day.  On a humid Texas night after a good rain thermal imaging is negatively affected. How you ask? It looks foggy and misty no matter how much you spent on your thermal. Black hot is harder on your eyes as your back ground glows super bright and your target will be a black blob at distance, but as you close the distance the same image clarity you get on white hot is achievable. The HD19 also has video out which is cool if you want to record animal surveys or film your hunts. The down fall to this unit is it has a lot of noise in the recording and can only be edited out with fairly high end video editing software and the know how to use that software. Most people won’t care about this aspect; I just thought it worth mentioning. The unit is powered by 4 AA batteries which last about 3 hours with continuous use. We tried to see if the life could be extended by using different brands and we found that you can combat the short battery life with Lithium batteries, which triple your usage. However, that improvement comes with a price, with Lithium batteries costing almost triple what an alkaline battery cost. Pulsar has an external power supply for this unit but it makes the profile bulky and adds extraneous weight.  The equipment that we take into the field with us has to be tough, and the Quantum HD19 is that for sure. The body has a distinctive rubber like feel that makes it easily identifiable at night when you are skimming the truck floor boards to find where it has rolled. It has a very ridged fiberglass body and plastics, where plastics will work wrapped in rubber. We have been using a similar Pulsar unit well over a year 3 to 5 nights a weeks and it as fallen off the high rack of the ranger and smashed on a gravel road, been dropped on the ground as a result of my encounter with an unseen hole, and has been bounced around, in the included soft case, in the truck and ranger bed and still works as good as day one.

In the night hog hunting world the pros definitely outweigh the cons with this unit. Thermals have the potential to change the game when it comes to the sport of hunting and wildlife management, thermal can also be used as part of a great home security plan. We at Boar Gear believe the Quantum HD19 S is a top notch unit at a price that makes it obtainable for most people who are interested in a hand held thermal.

Pros:

Price- $2700-$2900

Clear Image- 384X288 Resolution

30 Hz- Fast Refresh

Tough unit- Fiberglass and Rubber

Video Out

 

Cons:

19mm Lens- Quarter sized

Detection Range-500m

Battery Hog- 4AA every 3 or 4 hours.

 

Bottom line: Boar Gear highly recommends the Pulsar Quantum HD19 for anyone wanting a good thermal. The pros drastically outweigh the cons, the price is right and the performance is there.

 

By:

Dustin McDonald